EPA Laboratory VEET Report
Evaluation of Advance Power Systems International Inc.
Fitch Fuel Catalyst
Prepared by
Vehicle and Engine Emission Testing Services
15-17 Trade Zone Drive
Ronkonkoma NY 11779
Project Description:
Advanced Power Systems International Inc. (APSI) 558 Lime Rock Rd. Lakeville, CT. 06039 manufactures the Fitch Fuel Catalyst System (FFC Device) that may be installed on either gasoline or diesel fueled engines.
The FFC Device is designed to improve energy efficiency while minimizing impact to the environment.
APSI has selected to perform the Environmental Protection Agency (EPA) Federal Test Procedure (FTP) CVS-75 to evaluate what benefits may be achieved by installing the FCD System on a Diesel fuel vehicle.
Tailpipe emission gases to be measured:
Hydrocarbons………..(HC)
Carbon Monoxide……(CO)
Nitric Oxide………….(NOx)
Particulate Matter ……(PM)
Carbon Dioxide………(CO2) Miles per gallon
The vehicle selected:
GMC-2500
Model year 2002
6.6 Diesel engine
Vin # F235320
No EGR, No Exhaust Catalytic Converter, No modifications to EMU software
|
||||||||
The schedule of tests performed:
| Date | Event |
| March 30, 2004 | Vehicle delivered to VEETS by Fitch |
| March 31, 2004 | One (1) Baseline Test CVS-75 Fitch Device (F750) Installed and 200 mile Accumulation |
| April 5, 2004 | One (1) Retrofit Test-CVS-75 |
| April 6, 2004 | Vehicle placed in normal service. |
| June 1, 2004 | Fitch Fuel Catalyst Device removed from vehicle |
| June 2, 2004 | Vehicle placed in normal service. |
| July 20-21, 2004 | Vehicle returns to VEETS laboratory. Three (3) Baseline Test CVS-75 Fitch Device Installed (F750) and idled for three (3) hours |
| July 22-23, 2004 | Three (3) Retrofit Test-CVS-75 |
These procedures were designed to be an A-B-A-B comparison of the impact of the Fitch Fuel Catalyst. Where A=Baseline test, and B= Retrofit test.
Prior to delivery to VEETS the vehicle had routine oil and oil filter change and OBD scan performed by a GMC dealer. The vehicle was determined to be normal operating condition.
Test Performed at VEETS:
1. CVS-75 were conducted to establish a baseline.
2. Thereafter the vehicle is fitted with the FFC (model F750) system. The vehicle was started and idled for three (3) hours to insure exposure of circulated fuel to catalyst in the In Line unit.
3. Subsequent Retrofit CVS-75 were performed.
4. The baseline and retrofit data are then compared.
| Baseline Test CVS-75 Date: 3/31/04 |
|
| Manufacturer: GMC | Model: Duramax 2500 Diesel HD |
| Model Year: 2002 | Vin: F235320 |
| Odometer: 38078 | ALW: 6500 (Adjusted loaded vehicle Wt.) |
| Dyno Settings: | Fuel: Diesel (Supplied by Fitch) |
| Single Roll: | TRLHP-Fo-35.87 F1-2.3804 F2-0.0243 |
| Twin Roll: | Inertia Wt.: 6500lbs IRLHP: 18.6 |
Test Results
| Hydrocarbons (HC) grams/mile |
Oxides of Nitrogen (NOx) grams/mile |
Carbon Monoxide (CO) grams/mile |
Carbon Dioxide (CO2) grams/mile |
Particulates (PM) grams/mile |
Miles per Gallon |
| 0.464 | 2.977 | 3.868 | 0.32 | 10.25 |
| Retrofit Test-CVS-75 Date 4/5/2004 Fitch Device Installed 200 mile Accumulation |
|
| Manufacturer: GMC | Model: Duramax 2500 Diesel HD |
| Model Year: 2002 | Vin: F235320 |
| Odometer: 38288 | ALW: 6500 (Adjusted loaded vehicle Wt.) |
| Dyno Settings: | Fuel: Diesel (Supplied by Fitch) |
| Single Roll: | TRLHP-Fo-35.87 F1-2.3804 F2-0.0243 |
| Twin Roll: | Inertia Wt.: 6500lbs. IRLHP: 18.6 |
Test Results
| Hydrocarbons (HC) grams/mile |
Oxides of Nitrogen (NOx) grams/mile |
Carbon Monoxide (CO) grams/mile |
Carbon Dioxide (CO2) grams/mile |
Particulates (PM) grams/mile |
Miles per Gallon |
| 0.376 | 3.275 | 2.972 | 0.29 | 12.0 |
| Baseline Test CVS-75 Date: 7/20/04 – 7/21/04 |
|
| Manufacturer: GMC | Model: Duramax 2500 Diesel HD |
| Model Year: 2002 | Vin: F235320 |
| Odometer: 44267 | ALW: 6500 (Adjusted loaded vehicle Wt.) |
| Dyno Settings: | Fuel: Diesel (Supplied by Fitch) |
| Single Roll: | TRLHP-Fo-35.87 F1-2.3804 F2-0.0243 |
| Twin Roll: | Inertia Wt.: 6500lbs. IRLHP: 18.6 |
Baseline Test Results CVS-75
| Hydrocarbons (HC) grams/mile |
Oxides of Nitrogen (NOx) grams/mile |
Carbon Monoxide (CO) grams/mile |
Carbon Dioxide (CO2) grams/mile |
Particulates (PM) grams/mile |
Miles/Gal. |
| 0.089 | 3.595 | 1.812 | 942.428 | 0.376 | 10.761 |
| 0.068 | 3.647 | 1.562 | 948.771 | 0.316 | 10.695 |
| 0.086 | 3.972 | 1.715 | 977.795 | 0.414 | 10.375 |
| Retrofit Test-CVS-75 7/22/04 – 7/23/04 Fitch Device Installed and idled for three (3) hours |
|
| Manufacturer: GMC | Model: Duramax 2500 Diesel HD |
| Model Year: 2002 | Vin: F235320 |
| Odometer: 44328 | ALW: 6500 (Adjusted loaded vehicle Wt.) |
| Dyno Settings | Fuel: Diesel (Supplied by Fitch) |
| Single Roll: | TRLHP-Fo-35.87 F1-2.3804 F2-0.0243 |
| Twin Roll: | Inertia Wt.: 6500lbs. IRLHP: 18.6 |
Retrofit Test Results CVS-75
|
Hydrocarbons |
Oxides of Nitrogen (NOx) grams/mile |
Carbon Monoxide (CO) grams/mile |
Carbon Dioxide (CO2) grams/mile |
Particulates (PM) grams/mile |
Miles/Gal. |
| 0.079 | 2.547 | 2.048 | 838.411 | 0.238 | 12.087 |
| 0.097 | 3.291 | 1.829 | 850.363 | 0.238 | 11.921 |
| 0.102 | 3.203 | 1.849 | 833.556 | 0.245 | 12.16 |
Summary of Tests
| Date | Event | Hydrocarbons (HC) grams/mile |
Oxides of Nitrogen (NOx) grams/mile |
Carbon Monoxide (CO) grams/mile |
Carbon Dioxide (CO2) grams/mile |
Particulates (PM) grams/mile |
Miles per Gallon |
| 3/31/04 | Baseline 1 | 0.464 | 2.977 | 3.868 | 0.32 | 10.25 | |
| 4/5/04 | Retrofit 1 | 0.376 | 3.275 | 2.972 | 0.29 | 12.0 | |
| 6/1/04 | FFC removed | ||||||
| 7/20/04 | Baseline 2-1 | 0.089 | 3.595 | 1.812 | 942.428 | 0.376 | 10.761 |
| thru | Baseline 2-2 | 0.068 | 3.647 | 1.562 | 948.771 | 0.316 | 10.695 |
| 7/21/04 | Baseline 2-3 | 0.086 | 3.972 | 1.715 | 977.795 | 0.414 | 10.375 |
| 7/22/04 | Retrofit 2-1 | 0.079 | 2.547 | 2.048 | 838.411 | 0.238 | 12.087 |
| thru | Retrofit 2-2 | 0.097 | 3.291 | 1.829 | 850.363 | 0.238 | 11.921 |
| 7/23/04 | Retrofit 2-3 | 0.102 | 3.203 | 1.849 | 833.556 | 0.245 | 12.16 |
| Average of Baselines | 0.177 | 3.548 | 2.239 | 956.331 | 0.357 | 10.52 | |
| Average of Retrofits | 0.164 | 3.079 | 2.175 | 840.777 | 0.253 | 12.056 | |
| Difference | -0.013 | -0.469 | -0.065 | -115.555 | -0.104 | +1.536 | |
| Percent Improvement | -7.5% | -13.21% | -2.89% | -12.08% | -29.1% |
+14.60% |
| Baseline Tests | Vehicle in standard condition |
| Retrofit Tests | Vehicle with Fitch Fuel Catalyst installed |
Conclusions:
Comparison of results of the average of Baseline and Retrofit CVS-75 Fuel Economy and Emissions evaluations show statistically consistent improvement in fuel economy and emissions resulting from the installation of the Fitch Fuel Catalyst device.
